Mini ITX 117mm×155mm×20mm
Support Intel Socket G2 Mobile Sandy/Ivy Bridge
Intel® NM10 or HM67 Express Chipset (Atom or i3,i5,i7)
AMI EMI 32MB SMT/DIP-SPI Flash ROM
DDR3 1066/1333/1600MHz memory, SO-DIMM socket, Up to 8GB
Intel HD Graphics ( requires compatible CPU with built-in GPU )
Onboard Onboard Realtek HD ALC662 chipset, provide 6 channels output, onboard power amplifier.
2*Realtek RTL8111EL PCI-E Gigabit Ethernet LAN, support RTL/PXE diskless booting
Support 24bit dual channel LVDS connector. Resolution maximum up to:1920*1200
6*USB 2.0/1.1(2 external;4 expansion header)
1*Mini SATA socket;1*Mini-PCIE socket for WIFI
Rear panel I/O
1*12V -DC power supply
2*USB 2.0/1.1 port
2*1000M RJ45 port
2*Audio I/O interfaces( Line in,Line out,Mic)
4*USB 2.0/1.1 expansion header
2*CPU/SYS Chassis fan connectors
1*Audio I/O expansion header
6*COM expansion headers (support RS232/422/485)
1*GPIO expansion header(8 group)
1*VGA expamsion header
1*HDMI expansion header
1*Audio power amplifier
4PIN ATX power supply
+5V 1.5A,+12V 1.2A
-20°C~80°C (-4°F~176° )
Multi - Core
Featuring a built-in dual microphone array for crystal-clear voice communication and customizable SBX Pro Studio audio technologies, and a studio-grade 600 ohm headphone amplifier, the Sound Blaster Omni Surround 5.1 is ideal for anyone looking to seriously upgrade their PC or Mac audio experience.
KabelDirekt, a leader in high quality cables and audio gear, is proud to offer you our optical digital audio cable.
This fully digital audio cable provides a perfect crystal clear audio connection from the CarPC to audio amplifier.
Every KabelDirekt optical audio cable features a fully flexible PVC jacket that won’t split or tear and also 24K gold connectors to prevent corrosion. Plus because our cables are fiber optic they receive no RFI or EMI signal interference for crystal clear sound quality no matter where you use them.
Fully TOSLINK compatible
Our optic cables are made for use with 5.1 to 7.1 surround sound systems including Dolby TrueHD, Dolby Digital Plus, DTS-HD and LPCM.
When installing all Boss Audio Systems amplifiers, it is important to use the maximum gauge of wire that the power terminals will accommodate. For instance, if an amplifier has 4 gauge power and ground terminals, use high quality 4 gauge multi-strand copper wire to make your power connections. This maximizes the amplifier’s ability to draw the required power upon demand. This also helps prevent overheating that could cause failure. Always make sure your vehicle’s electrical system is capable of handling the current demands from any after-market accessory.
Please refer to the amplifier’s owner’s manual for correct wire gauge sizes.
Please be advised that 'Professional' installation of all of our products is recommended and encouraged. Installation by a professional installer increases the length of any applicable warranty on most Boss Audio Systems products. The warranty is void, however, on product that is damaged during installation by a non-professional installer. Professional installation should also ensure trouble-free usage for years to come.
The R1002 has two different ways that you can get a signal into it. A Low level input and a High level input. A low level input is measured in voltages. It comes in the form of RCA outputs from the back of your receiver and goes to the RCA inputs on your amplifier. A high level input is measured in watts. It comes in the form one positive and one negative wire from the back of your receiver to and goes to the input terminal of your amplifier in the same wire form. Low-level (RCA) input wiring is preferred for best audio performance. Always use a high-quality RCA cable for best audio performance. Note: Do not connect both the high level and low level inputs from your receiver to your amplifier at the same time!
The 'Gain' or 'Input Sensitivity' selectors on an amplifier are not to be mistaken for a volume setting. This setting allows users to match the gain from the source unit.
To set these selectors properly, you must 'defeat' any processing on your source unit. In other words, make sure Bass, Treble, and Subwoofer levels are set to '0' on your source unit before adjusting the gain or input sensitivity selector on your amplifier.
ScanXL™ supports 1996* and newer vehicles whether it be US, Asian, or European.
Supported OBD-II protocols: SAE-J1850 (PWM and VPW), ISO-9141, ISO-14230 (KWP2000), and ISO-15765 (CAN).
4 x 50W MAX.
4 x 45W EIAJ
4 x 30W @ 14.4V, 1KHz, 10%
4 x 80W MAX.
4 x 77W EIAJ
4 x 55W @ 14.4V, 1KHz, 10%
MOSFET output power stage
Excellent 2 ohm driving capability
Hi-Fi class distortion
Low output noise
MULTIPOWER BCD TECHNOLOGY
MOSFET OUTPUT POWER STAGE
The RTL2832U outputs 8-bit I/Q-samples, and the highest theoretically possible sample-rate is 3.2 MS/s, however, the highest sample-rate without lost samples that has been tested so far is 2.8 MS/s. The frequency range is highly dependent of the used tuner, the Rafael Micro's R820T offer possible range 25 - 1700 MHz .
NOTE: The DVB-T fuction not support US, Canada, Japan, Singapore users due to different digital standard, but the other fuction can be used.
Instructions, Driver & Software: https://learn.adafruit.com/getting-started-with-rtl-sdr-and-sdr-sharp/overview
SDR software: http://www.rtl-sdr.com/big-list-rtl-sdr-supported-software/
RTL-SDR Radio Receiver for Chrome
The BU-353-S4 is a USB GPS receiver that features a highly sensitive, low power consumption chipset in a ultra compact form factor. It is a new improved version of the bu-353. The BU-353-S4 is powered by a SiRF Star IV GPS chipset, and will provide you with superior performance in urban canyons, and in dense foliage. With the SiRF CGEE (Client Generated Extended Ephemeris) technology, has the capability of predicting satellite positions for up to 3 days in advance, and will deliver a CGEE-start time of less than 15 seconds under most conditions without any network assistance. The bu-353-S4's MicroPower mode allows the receiver to stay in a hot start-like condition almost continuously while consuming very little power.
The BU-353-S4 is suitable for the following applications:
BU-353-S4 Package Contents:
Default: NMEA 0183
Secondary: SiRF binary
Built specifically for drivers of HGVs, trucks and vans. CoPilot Truck is always ready to guide you; with truck safe navigation, offline maps, powerful trip planning and load specific optimal routes. Keeping you safe, compliant and efficient on the road.
CoPilot Live combines hi-end navigation and powerful trip-planning features with turn-by-turn voice directions to transform your Computer into an advanced GPS navigation system.
More than just voice-guided turn-by-turn navigation, CoPilot Live's powerful trip-planning and route preview features let you plan complete itineraries before you even hit the road.
Offline, detailed street maps of USA & Canada.
OBDLink® SX quickly and accurately diagnoses engine problems and accesses performance parameters for all OBD-II compliant vehicles (except hybrid or electric vehicles). Use the free OBDwiz software on any CarPC and you have a sophisticated, easy-to-use diagnostic system — for a small fraction of the cost of comparable standalone units!
OBDwiz, included with OBDLink® SX, allows you to:
Premium diagnostic software, such as ScanXL and ScanMaster, offers a myriad of additional features including Dynometer, multi-language support, and data manipulation tools. ScanXL’s Enhanced Diagnostics Add-ons offer support for thousands of enhanced manufacturer-specific parameters, as well as ABS and other proprietary systems.
Add up to 4 peripherals quickly and easily with the Sabrent HB-UMLS USB 2.0 Hub. Especially great for computers which come with only a few ports in an era when you need to attach many USB devices at once, such as a card reader, cell phone, iPod, thumb drive, mouse, keyboard, or an external hard drive. Achieve full 480 Mbps on each port, or daisy chain multiple hubs to a maximum of 127 devices. Fully backwards compatible with the USB 1.1 products
For a stable connection, the devices connected to the 4 Port Hub must not exceed a combined current of 5 volts 500mAh. External hard-drives should be connected to an external power source. This 4 Port hub will not charge an iPad (it will only sync).
Add up to 7 peripherals quickly and easily with the Sabrent HB-UMLS USB 2.0 Hub. Especially great for computers which come with only a few ports in an era when you need to attach many USB devices at once, such as a card reader, cell phone, iPod, thumb drive, mouse, keyboard, or an external hard drive. Achieve full 480 Mbps on each port, or daisy chain multiple hubs to a maximum of 127 devices. Fully backwards compatible with the USB 1.1 products
The 5V/1A power adapter ensures each port is fully operational at all times.
Warranty Details: Click Here