Mini ITX 117mm×155mm×20mm
Support Intel Socket G2 Mobile Sandy/Ivy Bridge
Intel® NM10 or HM67 Express Chipset (Atom or i3,i5,i7)
AMI EMI 32MB SMT/DIP-SPI Flash ROM
DDR3 1066/1333/1600MHz memory, SO-DIMM socket, Up to 8GB
Intel HD Graphics ( requires compatible CPU with built-in GPU )
Onboard Onboard Realtek HD ALC662 chipset, provide 6 channels output, onboard power amplifier.
2*Realtek RTL8111EL PCI-E Gigabit Ethernet LAN, support RTL/PXE diskless booting
Support 24bit dual channel LVDS connector. Resolution maximum up to:1920*1200
6*USB 2.0/1.1(2 external;4 expansion header)
1*Mini SATA socket;1*Mini-PCIE socket for WIFI
Rear panel I/O
1*12V -DC power supply
2*USB 2.0/1.1 port
2*1000M RJ45 port
2*Audio I/O interfaces( Line in,Line out,Mic)
4*USB 2.0/1.1 expansion header
2*CPU/SYS Chassis fan connectors
1*Audio I/O expansion header
6*COM expansion headers (support RS232/422/485)
1*GPIO expansion header(8 group)
1*VGA expamsion header
1*HDMI expansion header
1*Audio power amplifier
4PIN ATX power supply
+5V 1.5A,+12V 1.2A
-20°C~80°C (-4°F~176° )
Multi - Core
4 x 50W MAX.
4 x 45W EIAJ
4 x 30W @ 14.4V, 1KHz, 10%
4 x 80W MAX.
4 x 77W EIAJ
4 x 55W @ 14.4V, 1KHz, 10%
MOSFET output power stage
Excellent 2 ohm driving capability
Hi-Fi class distortion
Low output noise
MULTIPOWER BCD TECHNOLOGY
MOSFET OUTPUT POWER STAGE
E3iO recommended to use this adapter if you want to use an external audio amplifier without Digital Optical Input
We removed the original 110V to 5V external power supply and replaced it with a 12V to 5V power supply.
The RTL2832U outputs 8-bit I/Q-samples, and the highest theoretically possible sample-rate is 3.2 MS/s, however, the highest sample-rate without lost samples that has been tested so far is 2.8 MS/s. The frequency range is highly dependent of the used tuner, the Rafael Micro's R820T offer possible range 25 - 1700 MHz .
NOTE: The DVB-T fuction not support US, Canada, Japan, Singapore users due to different digital standard, but the other fuction can be used.
Instructions, Driver & Software: https://learn.adafruit.com/getting-started-with-rtl-sdr-and-sdr-sharp/overview
SDR software: http://www.rtl-sdr.com/big-list-rtl-sdr-supported-software/
RTL-SDR Radio Receiver for Chrome
The BU-353-S4 is a USB GPS receiver that features a highly sensitive, low power consumption chipset in a ultra compact form factor. It is a new improved version of the bu-353. The BU-353-S4 is powered by a SiRF Star IV GPS chipset, and will provide you with superior performance in urban canyons, and in dense foliage. With the SiRF CGEE (Client Generated Extended Ephemeris) technology, has the capability of predicting satellite positions for up to 3 days in advance, and will deliver a CGEE-start time of less than 15 seconds under most conditions without any network assistance. The bu-353-S4's MicroPower mode allows the receiver to stay in a hot start-like condition almost continuously while consuming very little power.
The BU-353-S4 is suitable for the following applications:
BU-353-S4 Package Contents:
Default: NMEA 0183
Secondary: SiRF binary
Built specifically for drivers of HGVs, trucks and vans. CoPilot Truck is always ready to guide you; with truck safe navigation, offline maps, powerful trip planning and load specific optimal routes. Keeping you safe, compliant and efficient on the road.
CoPilot Live combines hi-end navigation and powerful trip-planning features with turn-by-turn voice directions to transform your Computer into an advanced GPS navigation system.
More than just voice-guided turn-by-turn navigation, CoPilot Live's powerful trip-planning and route preview features let you plan complete itineraries before you even hit the road.
Offline, detailed street maps of USA & Canada.
OBDLink® SX quickly and accurately diagnoses engine problems and accesses performance parameters for all OBD-II compliant vehicles (except hybrid or electric vehicles). Use the free OBDwiz software on any CarPC and you have a sophisticated, easy-to-use diagnostic system — for a small fraction of the cost of comparable standalone units!
OBDwiz, included with OBDLink® SX, allows you to:
Premium diagnostic software, such as ScanXL and ScanMaster, offers a myriad of additional features including Dynometer, multi-language support, and data manipulation tools. ScanXL’s Enhanced Diagnostics Add-ons offer support for thousands of enhanced manufacturer-specific parameters, as well as ABS and other proprietary systems.
Add up to 4 peripherals quickly and easily with the Sabrent HB-UMLS USB 2.0 Hub. Especially great for computers which come with only a few ports in an era when you need to attach many USB devices at once, such as a card reader, cell phone, iPod, thumb drive, mouse, keyboard, or an external hard drive. Achieve full 480 Mbps on each port, or daisy chain multiple hubs to a maximum of 127 devices. Fully backwards compatible with the USB 1.1 products
For a stable connection, the devices connected to the 4 Port Hub must not exceed a combined current of 5 volts 500mAh. External hard-drives should be connected to an external power source. This 4 Port hub will not charge an iPad (it will only sync).
Add up to 7 peripherals quickly and easily with the Sabrent HB-UMLS USB 2.0 Hub. Especially great for computers which come with only a few ports in an era when you need to attach many USB devices at once, such as a card reader, cell phone, iPod, thumb drive, mouse, keyboard, or an external hard drive. Achieve full 480 Mbps on each port, or daisy chain multiple hubs to a maximum of 127 devices. Fully backwards compatible with the USB 1.1 products
The 5V/1A power adapter ensures each port is fully operational at all times.
Warranty Details: Click Here